How to deal with the vulcanization of battery electric locomotive plates?
The battery electric locomotive has been used for a long time or has been used irregularly for a long time, and the battery plate will be vulcanized, which will lead to a decline in battery performance, especially the capacity of the battery. If the battery plate has vulcanized, how to deal with it?
Here is a more effective method - chemical repair method. To put it simply, the chemical repair method is to use chemical reactions to dissolve the sulfur on the plate into the configured chemical reagents, thereby solving the problem of plate vulcanization. While this method works well, it is relatively cumbersome and time-consuming. The specific operation is as follows:
1. Pour out the electrolyte in the battery and rinse it.
2. Add pure water and sulfate, and then charge and discharge normally several times.
3. Pour out the solution, add the newly configured electrolyte after rinsing.
4. Normal charging, the capacity can be restored to more than 80% is successful. If it doesn't work, you can repeat it again, and if it doesn't work, it is recommended to scrap it.
